About Change of the Standard Accessory Connector for Vacuum Gauge (G-TRAN/OCTIE)

Thank you for your patronage for our products

We inform you today that the fitting screws for manual operation for the clamp hood of the D-SUB connector, a standard accessory for our vacuum gauges, are being replaced by those for screwdriver operation. The screwdriver operated screws provide more secure fastening. The fitting screws for the display cable (for the G-TRAN and OCTIE) and those for the sensing head (for GI-M2 and BMR2) for manual operation are also replaced by those for screwdriver operation.
We sincerely request your continued patronage.

1.Screws to be replaced

G-TRAN Series	SeriesSP1/SC1/BPR2/BMR2/ISP1/ISP2/ISM1/ISM2/IM1R1/IM2R1
OCTIE	SO1/BO1/ISO2

2.Scheduled date of change

● About March 2006 and thereafter (sequentially)

3.Contents of change

● G-TRAN Series

	Model	Manufacturer	Remarks
Current model	HDA-CTH1	Hirose Electric Co., Ltd.	Manually operated metric lock screw
New model	HDA-CTH	Hirose Electric Co., Ltd.	Screwdriver operated metric lock screw

● OCTIE Series

	Model	Manufacturer	Remarks
Current model	HDA-CTH1(4-40)	Hirose Electric Co., Ltd.	Manually operated inch lock screw
New model	HDA-CTH(4-40)	Hirose Electric Co., Ltd.	Screwdriver operated inch lock screw

● External view

Current model	New model

Manually operated lock screw HDA-CTH1 HDA-CTH1(4-40)	Screwdriver operated lock screw HDA-CTH HDA-CTH(4-40)

For further information

ULVAC, Inc. web_info