EQUIPMENT

Top > EQUIPMENT > Multi-chamber Sputtering System
MLXTM-3000N

Sputtering System

Multi-chamber Sputtering System
MLXTM-3000N

For more Information

mlx3000n

MLXTM-3000N meets customer's complicated requests by superior process flexibility and controllability, and excellent cost performance.

Features

  • Wafer size: 3 to 8 inch (75 to 200mm)
  • Accurate film quality control is available with precise parameter control under contamination free environment
  • Flexibilities of various process such as thick Alminium, TTH Bawiermotal and staokfilm.

Applications

  • Metallization for semiconductor devices such as Power device etc.

Specifications

Specification MLXTM-3000N
Configuration Transfer system 6sides transfer module x 1
Module Load/Unload module: 2modules (or 1module and 1degas)
Process module: MAX 4 modules
Wafer Size 75mm - 200mm diameter (3 to 8 inch)
Transfer robot Vacuum transfer robot with double pick-up
Control system PC control system
Application Power Device (Front side and Back side), UBM, Mounted Device, SAW Device. Non-Standard Shaped Wafers
Pumping systems Main Pump Load/Unload module : Dry Pump
Transfer module : TMP
Process module : Cryo Pump
Roughing Pump Dry Pump
Process Gas Line MAX 3 lines
Ultimate pressure Transfer: 1.3 x 10E-4Pa (1.0 x 10E-6Torr)
Process module: 1.0 x 10E-5Pa (7.5 x 10E-8Torr)
Electricity 50Hz/60Hz, 3Phase, AC 200V
Cooling Water 0.2 - 0.3MPa, Temperature 20 - 25ºC, 100L/min
Gas Process Gas: 0.05 - 0.1MPa (Dependent on Variety Gas)
Nitrogen : 0.05 - 0.1MPa
Compressed Air 0.55 - 0.75MPa
Grounding A Class (1st Class) Ground line (10 ohm on less)
Option 3" to 8" (75mm to 200mm diameter) wafer available
Shutter mechanism
Electrostatic chuck
RGA: Qulee
Loadlock module (optional TMP available)

For more Information